Run Quectel's Connection Manager as a systemd service on Ubuntu

I found myself in possession of a modem by Quectel (https://www.quectel.com) to hook up to a Raspberry Pi running Ubuntu 20.04. I wanted to auto run Quectel's connection manager executable quectel-CM on system start up but found limited information available online from Quectel. So I had to roll up my sleeves and make my own systemd service for that purpose.

This post outlines the steps I took:

Download and compile the quectel-CM executable

1. Using an Internet browser, download the latest Quectel LTE, 5G Linux USB driver, e.g. Quectel_LTE5G_Linux_USB_Driver_V1.0.zip from https://www.quectel.com/download-zone.
    
2.  Extract QConnectManager_Linux_V1.0.zip into a folder e.g. /home/ubuntu/Downloads/quectel-CM/.
   
   
3. In a Terminal, change directory to the extracted folder.
   
   $ cd ~/Downloads/quectel-CM/
   
   
4. Use the make command to compile the connection manager executable.
   
   $ make
   
   The quectel-CM executable is compiled.
   
   

Place the quectel-CM exe to the run time directory

1. In a Terminal, type in the following commands to change directory to the extracted directory.
   
   $ cd /home/ubuntu/Downloads/quectel-CM/
   
   
2. Copy the executable to /usr/local/bin/.
   
   $ sudo cp quectel-CM /usr/local/bin
   
   

Create a systemd service file

1.  In the directory /etc/systemd/system, use a text editor to create a service file e.g. quectelcm.service.
   
   $ sudo vi /etc/systemd/system/quectelcm.service
   
   
2. Type in the following lines, save and exit the file:
   

   [Unit]
   Description=Systemd service for running Quectel's Connection Manager quectel-CM executable
   
   [Service]
   ExecStart=/usr/local/bin/quectel-CM 
   Restart=always
   RestartSec=5
   
   [Install]
   WantedBy=multi-user.target
   

   
   
3. Give the service file the following executable permission:
   
   $ sudo chmod 664 /etc/systemd/system/quectelcm.service
   

 Create the service

1. In the Terminal, type in the following commands:
   
   $ sudo systemctl daemon-reload
   $ sudo systemctl enable quectelcm
   
   The quectelcm service is created.
   

 

Running and monitoring the service

1. You can either reboot the Raspberry Pi or type in the following command to start the service in a Terminal.
   
   $ sudo systemctl start quectelcm
   
   
2. To monitor the quectelcm service, use the journalctl command:
   
   $ journalctl -u quectelcm -f
   
   
   

Note: In order for quectel-CM to request and set the machine's network address, the software prerequisites net-tools and udhcpc must be installed on the Raspberry Pi.